Return to index

Canoeboot supports building for qemu as a target board. The resulting rom can then be tested using qemu.

The qemu board is mostly intended to speed up development by removing the need to flash to bare metal during initial tests. Qemu may also be useful for end users who intend to make changes to their Canoeboot rom without having to flash and reboot their machine.

Canoeboot can be built for qemu just like any other board.

./build boot roms qemu_x86_12mb

In order to test the resulting roms, you must have qemu installed on the host machine. Test the roms by pointing qemu to the rom in bios mode. For example:

qemu-system-x86_64 -bios bin/qemu_x86_12mb/grub_qemu_x86_12mb_libgfxinit_corebootfb_usqwerty.rom

qemu-system-x86_64 -bios bin/qemu_x86_12mb/uboot_payload_qemu_x86_12mb_libgfxinit_corebootfb.rom -serial stdio

There is basic support for an arm64 virtual machine as well, although the payloads are not as developed as the x86 one:

./build boot roms qemu_arm64_12mb

qemu-system-aarch64 -bios bin/qemu_arm64_12mb/uboot_payload_qemu_arm64_12mb_libgfxinit_corebootfb.rom \
	-M virt,secure=on,virtualization=on,acpi=on -cpu cortex-a53 -m 768M -serial stdio -vga none -display none

That command (above) does a serial console. Alper Nebi Yasak added this patch to Libreboot: https://browse.libreboot.org/lbmk.git/commit/?id=444f2899e69e9b84fd5428625aa04b00c1341804

This enables a graphical display in qemu, like so (only works for releases on or after Canoeboot 20231026, or Libreboot after release 20231021). Command:

qemu-system-aarch64 \
    -machine virt,secure=on,virtualization=on \
    -cpu cortex-a72 -m 1G \
    -serial stdio -device VGA \
    -device qemu-xhci \
    -device usb-kbd -device usb-mouse \
    -bios bin/qemu_arm64_12mb/*.rom

While development is the primary motivation for qemu support, the board makes it easy to test minor changes to release roms. For example one can use cbfstool from coreboot to edit the background image in a Canoeboot rom as follows:

cbfstool /path/to/rom remove -n background.png
cbfstool /path/to/rom add -f mynewbackground.png -n background.png -t raw

Using qemu allows the user to verify that the background image renders properly before performing the same operation on their release rom.

Markdown file for this page: https://canoeboot.org/docs/misc/emulation.md

Subscribe to RSS for this site

Site map

This HTML page was generated by the Untitled Static Site Generator.